L LOHAS Night Light Plug into Wall – Flat Flush Profile for Uncluttered Walls, Neutral Soft White 0.3W Glow
L LOHAS Night Light Plug into Wall – Flat Flush Profile for Uncluttered Walls, Neutral Soft White 0.3W Glow
Couldn't load pickup availability
Why you'll love it
- auto on/off dusk-to-dawn sensor means zero daily interaction once plugged in
- ultra-slim square design keeps the adjacent wall outlet free for other devices
- no heat output and no batteries make it safe around curious kids and pets
- 0.3W LED draw is essentially negligible on the electricity bill over 30,000 hours
- soft 40-lumen glow won't disrupt melatonin or wake a sleeping partner
- 6-pack + 5 color variants (Daylight, Soft White, Amber, Red, Blue) let buyers tune mood per room — e.g. amber/red for bedrooms to preserve night vision, daylight for task areas
- Daylight white color (not yellow/warm)
- Doesn't hog the entire outlet - leaves second outlet free
- Flat design won't get bumped off
- Very low wattage (0.3W) - very little operating cost
- Long-lasting through many power outages and years of use
- Cheaper than alternatives even after buying 24+ units (4 boxes)
- Automatically turns on at dusk and off in daylight (dusk-to-dawn)
Perfect for
- navigate to the bathroom at night without turning on overhead lights
- guide children safely down a hallway to the bathroom or parents' room
- provide a low-level glow in a nursery to check on a sleeping baby
- illuminate a kitchen for late-night water or snack runs
- light a staircase or corridor for elderly fall prevention
- Replacing higher-wattage older nightlights (1 watt) with more efficient 0.3 watt LED version
- Putting one in every outlet throughout the home and garage for whole-home coverage
- Providing light for outdoor/indoor cats in a barn at night
- Helping a 90-year-old avoid tripping in the dark
- Keeping a dog comfortable by avoiding total darkness
- Travel use / guest bedroom use
- Back doorway light staying on 24/7 in rooms with little bright daylight
Product Information
Auto On/Off: With built-in light sensor, the LOHAS LED night light will detect the light intensity, light up automatically at night, turn off during the day. Just plug in, no need to turn on/off. Soft Brightness: 0.3 watts, 40 lumen, 3000k soft white. Not too bright, not too dim, not dazzling. The LOHAS plug into wall night light guide you in the dark, perfect for home lighting. Energy Efficient: Work with dusk-to-dawn sensor, brightness changes according to ambient light, allowing your eyes to slowly adjust to the brightness. The darker the surroundings are, the brighter the nightlight will be. Widely Used: This plug-in night light can be used in bedroom, hallway, toilet, passageway, kitchen, living room, nursery room, corridor, etc. Give you lights in the dark. Safe & Reliable: Small size, won’t cover up other sockets, 110-130V AC input, standard US plug, no batteries needed, no heat, safe for kids room.
Technical Details Finish Type Square Base Material Plastic Bulb Base Prong Product Dimensions 2.04"D x 2.04"W x 2.04"H Item Weight 0.1 Pounds Lamp Type Night Light Shade Color White Shade Material Polycarbonate Switch Type No Switch Style Minimalism Brand L LOHAS LED Color Soft White Special Feature Energy Efficient, Humanized, Lightweight, Low Watt (0.3W), Ultra Slim Light Source Type LED Material Polycarbonate Room Type Bathroom, Bedroom, Dining Room, Kitchen, Living Room Recommended Uses For Product Indoor Power Source Corded Electric Shape Square Number of Light Sources 6 Is Waterproof False Bulb Shape Size A19 Mounting Type Wall Mount Number of Items 6 Lighting Method LED Control Method Remote Indoor/Outdoor Usage Indoor Specific Uses For Product General purpose Water Resistance Level Not Water Resistant Installation Type Plug In,Kitchen,Bedroom Number of Pieces 6 Efficiency Energy Efficient Voltage 120 Volts Brightness 40 Lumen Is Cordless? No Assembly Required No Product Benefits automatic on/off, energy efficient, safe and reliable for all ages Size 6 PACK Sensor Technology Photoresistor Manufacturer GK Lighting Shade Height 1.85 Inches Theme Indoor Light Color Soft White Part Number LH-NIGHT LIGHT-3000k-6-NEW Item Weight 1.6 ounces Item model number 110VGY-005-02-6 Is Discontinued By Manufacturer No Finish types Square Special Features Energy Efficient, Humanized, Lightweight, Low Watt (0.3W), Ultra Slim Batteries Included? No Batteries Required? No Color Temperature 3000 Kelvin Average Life 30000 Hours
Frequently Asked Questions
Will this bulky night light ruin the clean look of my outlet?
No. The housing is an ultra-slim 2.04-inch square that sits almost flush against the wall, so it reads as a small, intentional square rather than a chunky plastic plug. There is no protruding bulb, no glowing dome, and no switch to break up the line of the wall. For minimalist interiors, it is designed to disappear.
Does it block the second outlet on a standard wall receptacle?
No, and that is one of its most appreciated design choices. The slim side profile and edge-mounted prongs leave the second outlet completely free for a phone charger, lamp, or smart speaker. In a clean, uncluttered room, you do not have to choose between a night light and a usable outlet.
I prefer no switches, no buttons, no displays — is this night light truly set-and-forget?
Yes. There is no switch, no dimmer, no timer dial, and no app. You plug it in and the dusk-to-dawn sensor takes over, turning the light on at night and off during the day. For buyers who value restraint, it is one of the few night lights on the market with literally nothing to adjust.
Will the LED color look cheap or blue-ish against neutral decor?
The standard 3000K soft white is a warm, neutral tone that pairs well with white, beige, gray, and wood interiors. If you want even less visual noise, the amber variant is the most subdued, while daylight white is the cleanest and most architectural. None of the color options clash with minimalist palettes.
Can I use this in a Scandinavian, Japandi, or modern farmhouse style home without it looking out of place?
Yes. The matte polycarbonate square is intentionally simple, with no logos, patterns, or decorative trim, so it blends into Scandinavian, Japandi, modern farmhouse, and contemporary interiors equally well. The flat profile means it does not interrupt the quiet lines of a clean wall.
I want fewer devices in my home — is this essentially a one-time install?
It is as close to a one-time install as a night light gets. Plug it in once, leave it there, and the 30,000-hour LED will run for roughly 10+ years of normal nighttime use. There is no app, no hub, no battery, and nothing to replace, which fits a minimalist approach of buying fewer, better things.
How does this compare to decorative night lights with shades and novelty shapes?
Decorative shades and novelty shapes add visual clutter and collect dust, and they usually rely on a brighter, warmer bulb. This unit is the opposite approach: one quiet square of light, no shade, no ornament, and a low glow that supports the room instead of competing with it. For minimalists, less light and less object is more.
Does the glow itself feel intentional, or does it look like a gadget?
The 40-lumen output is calibrated to feel like ambient room glow rather than a gadget. There is no harsh hotspot because the LED is diffused across the face, and the soft 3000K tone reads as natural warmth. In a dark hallway, it looks more like a soft architectural detail than an electronic device.
Will the photoresistor sensor be visible and ruin the look?
The sensor is a small, dark dot integrated into the face of the unit and is barely noticeable. It is positioned to be functional rather than decorative, but at normal viewing distance it blends into the housing. For most interiors, it is essentially invisible.
How do I install and set up the L LOHAS LED night light?
There is no setup. Remove the unit from the packaging and plug it directly into any standard US 110-130V wall outlet. The built-in dusk-to-dawn photoresistor sensor will detect ambient light and turn the LED on automatically when the room gets dark, then off again at dawn. There is no app, switch, timer, or pairing required.
Which way should the night light face for the dusk-to-dawn sensor to work best?
Plug it in with the sensor facing the room, not toward a bright window or lamp, so it can correctly read the room's ambient light. In a hallway, the standard orientation is fine. If the light seems to stay on too long during the day or come on too early in the evening, simply rotate the plug 180 degrees so the sensor is oriented differently.
Can I leave these plugged in continuously, or should I unplug them when I travel?
They are designed for continuous 24/7 use. The 0.3W draw is so low that leaving them plugged in year-round costs only a few cents per month, and many customers use them as always-on lights in back hallways, garages, and barns. When traveling, you can leave them in place so you return to a lit home, or unplug them to suit your preference.
Does this night light work in a US standard outlet, and what about GFCI or tamper-resistant receptacles?
Yes. It uses standard US two-prong plugs and is compatible with any standard 110-130V household outlet, including tamper-resistant receptacles in newer homes and GFCI outlets in kitchens, bathrooms, and garages. The slim profile fits easily into decorator and Decora-style wall plates as well.
Will it work in older homes with 2-prong ungrounded outlets?
Yes. The plug is a standard two-prong configuration, so it fits both grounded and ungrounded outlets found in older homes. There is no ground pin requirement, and the 0.3W draw is well within the capacity of any household circuit.
What is included in the box, and do I need to buy anything else?
Each box contains six L LOHAS LED night lights in the color variant you select. No batteries, bulbs, adapters, or accessories are required. Just unbox, plug them in, and they are ready to use.
Is it safe to leave the night light plugged in during a thunderstorm or power outage?
The unit is designed for normal household use and has no batteries to leak or fail. As with any plug-in electronic, it is best practice to unplug sensitive devices during a severe electrical storm, but the night light itself poses no special risk. When power returns, the dusk-to-dawn sensor will resume operation automatically.
How long will the LED last, and what happens when it finally burns out?
The LED is rated for approximately 30,000 hours of use, which translates to roughly 10+ years of typical nighttime use. When it does eventually reach end of life, the unit is simply replaced rather than repaired, but most owners will use them for many years before that happens.
What is the difference between an LED night light and a traditional incandescent night light?
Traditional incandescent night lights use a small hot filament that burns out within a year or two, runs warm, and typically draws 1W to 7W of power. LED night lights use a solid-state diode that runs cool, lasts around 30,000 hours, and draws as little as 0.3W. The LED version is safer around children and pets, far cheaper to run, and rarely needs replacement.
